How to apply your decals

 

Step 1: Turn controller on so you can see the light while installing your decal sticker

 

Step 2: Wash hands and dry with lint free towel to insure nothing can contaminate vinyl

 

Step 3: Wash the surface area around the light bar with alcohol and let air dry.

 

Step 4: Take off the white backing from sticker and hold the clear transfer paper careful not to touch the sticker. Touching the sticker and cause the sticker not to stick.

 

Step 5: Carefully place the sticker over light bar make sure light is on to make sure no light is shinny throw the area you don’t want light to be.

 

Step 6: Use your finger to rub down the sticker getting all air bubbles out and making sure that the sticker adheres to remote well.

 

Step 7: Remove transfer sheet from the sticker by gently pulling at an angle from left to right away from the surface area that you placed the sticker, put one finger on sticker as you pull away transfer paper for best results.

 

Step 8: Set back and enjoy your new customized remote.

 

Step 1: Turn controller on so you can see the light while installing your decal sticker

 

Step 2: Wash hands and dry with lint free towel to insure nothing can contaminate vinyl

 

Step 3: Wash the surface area around the light bar with alcohol and let air dry.

 

Step 4: Take off the white backing from sticker paper careful not to touch the sticker. Touching the sticker and cause the sticker not to stick. Dont remove clear coating this protects your image.

 

Step 5: Carefully place the sticker over light bar make sure light is on to make sure no light is shinny throw the area you don’t want light to be.

 

Step 6: Use your finger to rub down the sticker getting all air bubbles out and making sure that the sticker adheres to remote well

 

Step 7: Set back and enjoy your new customized remote.